How to install and test the emergency stop switch?
- Categories:NEWS
- Author:Operation
- Origin:Original
- Time of issue:2022-01-21
- Views:0
(Summary description)Install and test the operation of the emergency stop switch
Install the Maintenance Control Unit
Test Emergency Stop Switch Operation
How to install and test the emergency stop switch?
(Summary description)Install and test the operation of the emergency stop switch
Install the Maintenance Control Unit
Test Emergency Stop Switch Operation
- Categories:NEWS
- Author:Operation
- Origin:Original
- Time of issue:2022-01-21
- Views:0
Install and test the operation of the emergency stop switch
1.Install the Maintenance Control Unit
The maintenance control unit is used to operate the escalator at a reduced speed during maintenance.
CAUTION!
Please ensure that yourself and all other persons near the escalator are not in a dangerous position before attempting to start the escalator.
Ensure the emergency stop button is pressed down before entering the maintenance room.
First, remove the cover from the maintenance control socket and plug in the maintenance control unit.
Second, test the operation of the maintenance control unit.
1) Plug the inspection controller into the inspection socket.
2) Press the start button and up button at the same time.
» The unit moves upwards (direction of drive unit). 3) Release the button.
» The unit must stop immediately.
4) Press the start button and the down button at the same time.
» The unit moves downwards (direction of tensioning station).
5) Release the button.
» The unit must stop immediately.
Use the maintenance control unit to run the escalator in both directions at least one full revolution of the step band. Once the unit is operating correctly, begin the final adjustment of all springs, switches and sensors.
2.Test Emergency Stop Switch Operation
Use maintenance control unit to run the escalator in any direction and then push the emergency stop switch to verify it is functioning properly. Then return the switch to the original position (pulled out) for normal escalator operation.
Scan the QR code to read on your phone
News More


Deysse on first day of the 15th WEE Expo!

The potential of the Vietnam elevator & escalator market

INTERLIFT - The Home of Elevator
MESSAGES
CONTACT US
> Contact Person: Sean Lee
> Phone: +86 20 8304 1994
> Fax: +86 20 8304 1967
> Whatsapp: +8613924192218
> Email: info@deysse.com
> Web: http://www.deysse.com
> Address: Room 2801-1,Jinhui Building,No.123 Jiefang South Road,Yuexiu District, Guangzhou, 510120 China
Copyright © 2021 Guangzhou Deysse Elevator Fittings Co., Ltd All Rights Reserved. privacy protection